Replacement Japan excavator engine part on 4D95L water pump 6204-61-1102
Major Diameter [Min: | 45.0 LB |
Port Orientation - Shaft End: | Flange Mount |
Relief Valve Setting: | Right Hand (CW) |
Shaft Seal Type: | 2520VQ21A5-1DD20 |
Max. RPM [Max: | 2.5 |
Minor Diameter [Max: | Flange |
GPM @ 1,800 rpm, Cover End: | 3/16 in |
Minor Diameter: | Standard Pilot |
PDF |
|
Product Details
Major Diameter [Min | 45.0 LB |
Port Orientation - Shaft End | Flange Mount |
Relief Valve Setting | Right Hand (CW) |
Shaft Seal Type | 2520VQ21A5-1DD20 |
Max. RPM [Max | 2.5 |
Minor Diameter [Max | Flange |
GPM @ 1,800 rpm, Cover End | 3/16 in |
Minor Diameter | Standard Pilot |
Rotation | 0.875 in |
Shaft End RPM [Max | Straight w/ Key |
Cover End Pressure [Max | 2520VQ |
Pilot Type | 1 15/16 in |
Integral Valve Configuration | Double |
Mounting Flange | Buna-N |
Controlled Flow Rate | 2500 |
Spline Description | N/A |
Pump Series | SAE B, 2 Bolt |
Port Size | Single Shaft Seal |
GPM @ 1,800 rpm, Shaft End | N/A |
Minor Diameter [Min | 2700 |
Shaft Length | 2500 |
Shaft Dia. | N/A |
Shaft Key | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Port Orientation - Cover End | N/A |
Seal Material | N/A |
Cover End Flow @ RPM | N/A |
Mounting | N/A |
Cover End RPM [Max | N/A |
Weight | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Manufacturer Part No. | 2520VQ21A5-1DD20 |
Shaft End Flow @ RPM | 3000 |
Major Diameter [Max | 3000 |
Shaft End Pressure [Max | 7.5 |
Pressure Port Size, Cover End | 31.5 |
Displacement Cover End (cu in/revolution) | w/o Integral Valves |
Pressure Port Size, Shaft End | Outlet 135° CW from Inlet |
Model No. | Outlet 90° CW from Inlet |
Shaft Type | 3/4 in Flange |
Displacement Shaft End (cu in/revolution) | 4.1 |
Port Type | 1.1 |