2P0661 Water Pump for Cooling System for Excavator 225 235
Port Size: | 30.0 LB |
Minor Diameter: | Flange Mount |
Manufacturer Part No.: | Right Hand (CW) |
GPM @ 1,800 rpm, Shaft End: | V2010-1F12S6S-1AA12 |
Minor Diameter [Min: | 1.5 |
Pilot Type: | Flange |
Displacement Shaft End (cu in/revolution): | 3/16 in |
Weight: | N/A |
PDF |
|
Product Details
Port Size | 30.0 LB |
Minor Diameter | Flange Mount |
Manufacturer Part No. | Right Hand (CW) |
GPM @ 1,800 rpm, Shaft End | V2010-1F12S6S-1AA12 |
Minor Diameter [Min | 1.5 |
Pilot Type | Flange |
Displacement Shaft End (cu in/revolution) | 3/16 in |
Weight | N/A |
Pressure Port Size, Cover End | 0.875 in |
Cover End Flow @ RPM | Straight w/ Key |
Shaft Length | V2010 |
Shaft End Pressure [Max | 2 5/16 in |
Mounting Flange | Double |
Shaft End RPM [Max | Buna-N |
Seal Material | 2400 |
Rotation | N/A |
Max. RPM [Max | SAE B, 2 Bolt |
Shaft Seal Type | Single Shaft Seal |
GPM @ 1,800 rpm, Cover End | N/A |
Shaft Type | 3000 |
Controlled Flow Rate | 2400 |
Shaft Dia. | N/A |
Mounting | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
Cover End Pressure [Max | N/A |
Port Type | N/A |
Pressure Port Size, Shaft End | N/A |
Major Diameter [Max | N/A |
Port Orientation - Cover End | N/A |
Pump Series | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Spline Description | 2200 |
Major Diameter [Min | 2200 |
Model No. | 9 |
Minor Diameter [Max | 18 |
Relief Valve Setting | N/A |
Integral Valve Configuration | Outlet 135° CCW from Inlet |
Displacement Cover End (cu in/revolution) | Outlet Opposite Inlet |
Shaft End Flow @ RPM | 1/2 in SAE O-Ring |
Port Orientation - Shaft End | 3/4 in SAE O-Ring |
Shaft Key | 1.2 |
Cover End RPM [Max | 2.4 |