Hydraulic Gear Pump 705-12-32010 Steering Pump for Bulldozer D41A-3
Major Diameter [Max: | 30.0 LB |
Minor Diameter: | Flange Mount |
Shaft End RPM [Max: | Right Hand (CW) |
Pressure Port Size, Cover End: | V2010-1F9B2B-1CC12 |
Manufacturer Part No.: | 1 1/2 |
Max. RPM [Max: | Flange |
Controlled Flow Rate: | 3/16 in |
Mounting Flange: | N/A |
PDF |
|
Product Details
Major Diameter [Max | 30.0 LB |
Minor Diameter | Flange Mount |
Shaft End RPM [Max | Right Hand (CW) |
Pressure Port Size, Cover End | V2010-1F9B2B-1CC12 |
Manufacturer Part No. | 1 1/2 |
Max. RPM [Max | Flange |
Controlled Flow Rate | 3/16 in |
Mounting Flange | N/A |
Port Orientation - Shaft End | 0.875 in |
Port Orientation - Cover End | Straight w/ Key |
Rotation | V2010 |
Mounting | 2 5/16 in |
Pump Series | Buna-N |
Minor Diameter [Max | 2800 |
Cover End Flow @ RPM | N/A |
Spline Description | SAE B, 2 Bolt |
Cover End RPM [Max | Single Shaft Seal |
Shaft End Flow @ RPM | N/A |
Shaft End Pressure [Max | 3000 |
GPM @ 1,800 rpm, Cover End | 2800 |
Shaft Key | N/A |
Port Size | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
Pilot Type | N/A |
Shaft Length | N/A |
Seal Material | N/A |
Shaft Dia. | N/A |
Shaft Type | N/A |
Displacement Cover End (cu in/revolution) | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) | V2010-1F9B2B-1CC12 |
Model No. | 2500 |
Minor Diameter [Min | 2500 |
Pressure Port Size, Shaft End | 3 |
Cover End Pressure [Max | 13.5 |
Relief Valve Setting | N/A |
GPM @ 1,800 rpm, Shaft End | Outlet 45° CW from Inlet |
Port Type | Outlet Inline w/Inlet |
Weight | 1/2 in SAE O-Ring |
Integral Valve Configuration | 3/4 in SAE O-Ring |
Shaft Seal Type | 0.4 |
Major Diameter [Min | 1.81 |