Excavator PC200-6 S6D95 diesel engine water pump for 6209-61-1100
Cover End Pressure [Max: | 75.0 LB |
Mounting: | Flange Mount |
Pilot Type: | Left Hand (CCW) |
Controlled Flow Rate: | 3520VQ25A8-11DC20L |
Shaft Type: | 3 |
Manufacturer Part No.: | Flange |
Max. RPM [Max: | N/A |
GPM @ 1,800 rpm, Cover End: | Standard Pilot |
PDF |
|
Product Details
Cover End Pressure [Max | 75.0 LB |
Mounting | Flange Mount |
Pilot Type | Left Hand (CCW) |
Controlled Flow Rate | 3520VQ25A8-11DC20L |
Shaft Type | 3 |
Manufacturer Part No. | Flange |
Max. RPM [Max | N/A |
GPM @ 1,800 rpm, Cover End | Standard Pilot |
Shaft Key | 1.25 in |
Port Orientation - Shaft End | 14 Tooth Splined |
Pressure Port Size, Shaft End | 3520VQ |
Port Type | 1 15/16 in |
Seal Material | Buna-N |
Rotation | 2500 |
Integral Valve Configuration | 1.04 in |
Shaft Seal Type | SAE C, 2 Bolt |
Shaft Dia. | Single Shaft Seal |
Spline Description | 12/24 |
Major Diameter [Min | 2500 |
Weight | 2500 |
Minor Diameter [Max | N/A |
Port Orientation - Cover End | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Shaft Length | 1.248 in |
Pressure Port Size, Cover End | 1.247 in |
Minor Diameter | N/A |
Pump Series | N/A |
GPM @ 1,800 rpm, Shaft End | N/A |
Displacement Shaft End (cu in/revolution) | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Shaft End Flow @ RPM | 3520VQ25A8-11DC20L |
Displacement Cover End (cu in/revolution) | 3000 |
Relief Valve Setting | 3000 |
Shaft End Pressure [Max | 12 |
Cover End Flow @ RPM | 37.5 |
Model No. | w/o Integral Valves |
Major Diameter [Max | Outlet 45° CW from Inlet |
Port Size | Outlet 90° CW from Inlet |
Minor Diameter [Min | 3/4 in Flange |
Shaft End RPM [Max | 1 1/4 in Flange |
Cover End RPM [Max | 1.67 |
Mounting Flange | 4.98 |