Excavator CAT E325 Bucket Seal Kit Hydraulic Cylinder Seals Kits for Caterpillar
Spline Description: | 30.0 LB |
Displacement Cover End (cu in/revolution): | Flange Mount |
Cover End RPM [Max: | Right Hand (CW) |
Minor Diameter: | V2010-1F13S2S-1DB12 |
Shaft End Flow @ RPM: | 1 1/2 |
Seal Material: | Flange |
Cover End Pressure [Max: | 3/16 in |
Controlled Flow Rate: | N/A |
PDF |
|
Product Details
Spline Description | 30.0 LB |
Displacement Cover End (cu in/revolution) | Flange Mount |
Cover End RPM [Max | Right Hand (CW) |
Minor Diameter | V2010-1F13S2S-1DB12 |
Shaft End Flow @ RPM | 1 1/2 |
Seal Material | Flange |
Cover End Pressure [Max | 3/16 in |
Controlled Flow Rate | N/A |
Pilot Type | 0.875 in |
Weight | Straight w/ Key |
Manufacturer Part No. | V2010 |
Pump Series | 2 5/16 in |
GPM @ 1,800 rpm, Shaft End | Buna-N |
Major Diameter [Min | 2400 |
Integral Valve Configuration | N/A |
Displacement Shaft End (cu in/revolution) | SAE B, 2 Bolt |
Model No. | Single Shaft Seal |
Shaft End Pressure [Max | N/A |
Shaft Seal Type | 3000 |
Pressure Port Size, Cover End | 2400 |
Major Diameter [Max | N/A |
Shaft Length | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
Minor Diameter [Max | N/A |
Max. RPM [Max | N/A |
Port Size | N/A |
Relief Valve Setting | N/A |
Port Orientation - Cover End | N/A |
Port Type | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
Pressure Port Size, Shaft End | V2010-1F13S2S-1DB12 |
Cover End Flow @ RPM | 2500 |
Minor Diameter [Min | 2200 |
Mounting Flange | 3 |
Shaft Key | 19.5 |
Mounting | N/A |
Port Orientation - Shaft End | Outlet 45° CCW from Inlet |
GPM @ 1,800 rpm, Cover End | Outlet 90° CW from Inlet |
Shaft Type | 1/2 in SAE O-Ring |
Shaft Dia. | 3/4 in SAE O-Ring |
Rotation | 0.4 |
Shaft End RPM [Max | 2.59 |