DSG-01-3C10;DSG01-3C10 Solenoid Directional Yuken Hydraulic Valve
Shaft Type: | 75.0 LB |
Shaft Key: | Flange Mount |
Pilot Type: | Left Hand (CCW) |
Mounting Flange: | 3520V30A12-11AA22L |
Pressure Port Size, Cover End: | 3 |
Port Orientation - Shaft End: | Flange |
Shaft End RPM [Max: | N/A |
Controlled Flow Rate: | Standard Pilot |
PDF |
|
Product Details
Shaft Type | 75.0 LB |
Shaft Key | Flange Mount |
Pilot Type | Left Hand (CCW) |
Mounting Flange | 3520V30A12-11AA22L |
Pressure Port Size, Cover End | 3 |
Port Orientation - Shaft End | Flange |
Shaft End RPM [Max | N/A |
Controlled Flow Rate | Standard Pilot |
Rotation | 1.375 in |
Mounting | 14 Tooth Splined |
Shaft Length | 3520V |
Relief Valve Setting | 2.3125 in |
Minor Diameter [Min | Buna-N |
Cover End RPM [Max | 1800 |
Shaft End Pressure [Max | 1.055 in |
Major Diameter [Max | SAE C, 2 Bolt |
Minor Diameter | Single Shaft Seal |
Cover End Pressure [Max | 12/24 |
Spline Description | 1800 |
Shaft Seal Type | 1800 |
Port Size | N/A |
Port Type | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Cover End Flow @ RPM | 1.25 in |
Model No. | 1.247 in |
Weight | 1.06 in |
Minor Diameter [Max | 1.05 in |
Port Orientation - Cover End | N/A |
Pump Series | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Max. RPM [Max | 3520V30A12-11AA22L |
Displacement Cover End (cu in/revolution) | 3000 |
Displacement Shaft End (cu in/revolution) | 2500 |
GPM @ 1,800 rpm, Cover End | 18 |
Pressure Port Size, Shaft End | 45 |
GPM @ 1,800 rpm, Shaft End | N/A |
Major Diameter [Min | Outlet 135° CCW from Inlet |
Shaft Dia. | Outlet Opposite Inlet |
Integral Valve Configuration | 3/4 in Code 61 |
Shaft End Flow @ RPM | 1 1/4 in Code 61 |
Manufacturer Part No. | 2.5 |
Seal Material | 5.9 |