Hydstar Brand Engine Parts 3304 111-8010 Water Thermostat for CAT
| Minor Diameter [Max: | 18.0 LB |
| Relief Valve Setting: | Foot Mounted |
| Minor Diameter: | Right Hand (CW) |
| Port Orientation - Cover End: | 1 1/4 |
| Displacement Shaft End (cu in/revolution): | NPT |
| Port Orientation - Shaft End: | 3/16 in |
| Shaft Dia.: | 11 |
| Spline Description: | 8 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Minor Diameter [Max | 18.0 LB |
| Relief Valve Setting | Foot Mounted |
| Minor Diameter | Right Hand (CW) |
| Port Orientation - Cover End | 1 1/4 |
| Displacement Shaft End (cu in/revolution) | NPT |
| Port Orientation - Shaft End | 3/16 in |
| Shaft Dia. | 11 |
| Spline Description | 8 gpm @ 1200 rpm |
| Shaft Length | 0.75 in |
| Max. RPM [Max | Straight w/ Key |
| Mounting | 12 / 1750 |
| Cover End Flow @ RPM | V20 |
| Shaft End Pressure [Max | 2.66 in |
| Shaft Key | SAE-12 |
| Pressure Port Size, Shaft End | Buna-N |
| Major Diameter [Min | 2800 |
| Port Type | 2500 psi |
| Shaft End RPM [Max | 12 |
| Controlled Flow Rate | P |
| Cover End RPM [Max | Foot Bracket @ 12 o'clock |
| Rotation | S |
| GPM @ 1,800 rpm, Cover End | 2 |
| Cover End Pressure [Max | 90° CCW from Inlet |
| Weight | 1.62 |
| Minor Diameter [Min | w/o Integral Valves |
| Displacement Cover End (cu in/revolution) | 1B |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump