Bulldozer D65 Hydraulic Gear Pump Pilot Pump 705-51-20370
| GPM @ 1,800 rpm, Shaft End: | 18.0 LB |
| Spline Description: | Flange Mount |
| Port Orientation - Cover End: | Right Hand (CW) |
| Shaft Dia.: | 1 1/4 |
| Major Diameter [Max: | NPT |
| Integral Valve Configuration: | N/A |
| Pressure Port Size, Shaft End: | 11 |
| Rotation: | 7 gpm @ 1200 rpm |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Shaft End | 18.0 LB |
| Spline Description | Flange Mount |
| Port Orientation - Cover End | Right Hand (CW) |
| Shaft Dia. | 1 1/4 |
| Major Diameter [Max | NPT |
| Integral Valve Configuration | N/A |
| Pressure Port Size, Shaft End | 11 |
| Rotation | 7 gpm @ 1200 rpm |
| Model No. | 0.73 in |
| Shaft End Flow @ RPM | 11 Tooth Splined |
| Pump Series | 10.5 gpm @ 1800 rpm |
| Cover End Flow @ RPM | V20 |
| Port Size | 1 1/4 in |
| Relief Valve Setting | 3/4 in NPT |
| Minor Diameter | Buna-N |
| Minor Diameter [Max | 3000 |
| Shaft Type | 2500 psi |
| Major Diameter [Min | 10 1/2 |
| Seal Material | P |
| Displacement Shaft End (cu in/revolution) | SAE A, 2 Bolt |
| Cover End RPM [Max | P |
| Shaft Length | 1 |
| Port Orientation - Shaft End | 90° CW from Inlet |
| Mounting | 1.39 |
| Minor Diameter [Min | w/o Integral Valves |
| Shaft End RPM [Max | 38D |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump