A11VO175 Axial Piston Pump And Motor For Rexroth Hydraulic Parts
| Manufacturer Part No.: | 18.0 LB |
| Max. RPM [Max: | Flange Mount |
| Displacement Shaft End (cu in/revolution): | Right Hand (CW) |
| Mounting: | SAE-20 |
| Pump Series: | SAE |
| Mounting Flange: | N/A |
| Port Type: | 11 |
| Displacement Cover End (cu in/revolution): | 8 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Manufacturer Part No. | 18.0 LB |
| Max. RPM [Max | Flange Mount |
| Displacement Shaft End (cu in/revolution) | Right Hand (CW) |
| Mounting | SAE-20 |
| Pump Series | SAE |
| Mounting Flange | N/A |
| Port Type | 11 |
| Displacement Cover End (cu in/revolution) | 8 gpm @ 1200 rpm |
| Model No. | 0.625 in |
| Cover End RPM [Max | 9 Tooth Splined |
| Shaft Key | 12 gpm @ 1750 rpm |
| Cover End Pressure [Max | V20 |
| Shaft Length | 1 1/4 in |
| Pressure Port Size, Shaft End | SAE-12 |
| Relief Valve Setting | Buna-N |
| Pressure Port Size, Cover End | 2800 |
| Minor Diameter | 2500 psi |
| Shaft Dia. | 12 |
| Controlled Flow Rate | S |
| Weight | SAE A, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End | S |
| Shaft End RPM [Max | 1 |
| Shaft End Pressure [Max | 90° CW from Inlet |
| Rotation | 1.62 |
| Seal Material | w/o Integral Valves |
| Pilot Type | 62D |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump