PFE41 Atos Positive Displacement Hydraulic Vane Single Stage Pump
| Pressure Port Size, Shaft End: | 50.0 LB |
| Pressure Port Size, Cover End: | Foot Mounted |
| Spline Description: | Left Hand (CCW) |
| Major Diameter [Max: | 25 gal/min @ 1200 rpm |
| Pilot Type: | 35VQ25AF-1C20-LH |
| Mounting Flange: | 2 |
| Minor Diameter: | Flange |
| Shaft End Pressure [Max: | 5/16 in |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End | 50.0 LB |
| Pressure Port Size, Cover End | Foot Mounted |
| Spline Description | Left Hand (CCW) |
| Major Diameter [Max | 25 gal/min @ 1200 rpm |
| Pilot Type | 35VQ25AF-1C20-LH |
| Mounting Flange | 2 |
| Minor Diameter | Flange |
| Shaft End Pressure [Max | 5/16 in |
| GPM @ 1,800 rpm, Cover End | 20 |
| Seal Material | 25 gpm @ 1200 rpm |
| Shaft Length | 1 |
| Minor Diameter [Max | 1.25 in |
| Port Orientation - Cover End | Straight w/ Key |
| Model No. | 37.5 gpm @ 1800 rpm |
| Major Diameter [Min | 35VQ |
| Cover End RPM [Max | 2.88 in |
| Displacement Cover End (cu in/revolution) | Single |
| Shaft End RPM [Max | F |
| Shaft Type | 1 1/4 in Flange |
| Max. RPM [Max | Buna-N |
| Port Size | 2500 |
| Controlled Flow Rate | 3000 psi |
| Minor Diameter [Min | 37 1/2 |
| Shaft Key | A |
| Mounting | SAE C, 2 Bolt |
| Relief Valve Setting | Single Shaft Seal |
| Pump Series | Inline w/ Inlet |
| Shaft End Flow @ RPM | 35VQ25AF-1C20-LH |
| Shaft Seal Type | 5 |
| GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump