Sponsored products related to DODGE F4S-S2-111R Flange Block Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | O | B | C | P | S | L | G |
| 10N.6206.F111.B | SNR | 30 mm | - | 16 mm | 16 mm | - | - | - | - |
| YSPAG 209-111 | SKF | 42.862 mm | - | - | 22 mm | - | - | - | - |
| YET209-111 | SKF | 42,863 mm | - | 30,2 mm | 33,2 kN | - | - | - | - |
| YSP 209-111 SB-2F | SKF | 42.862 mm | - | - | 22 mm | - | - | - | - |
| 1110KL | Timken | 41,275 mm | - | 42,86 mm | 36,3 kN | - | 21,43 mm | 4,76 mm | 21,43 mm |
| 1110KLL | Timken | 41,275 mm | - | 42,86 mm | 36,3 kN | - | 21,43 mm | 4,76 mm | 21,43 mm |
| 1110KLLB | Timken | 41,275 mm | - | 42,86 mm | 36,3 kN | - | 21,43 mm | 4,76 mm | 21,43 mm |
| 1110KRR | Timken | 41,275 mm | 24,18 mm | 42,86 mm | 36 kN | 21,59 mm | 21,4 mm | 4,8 mm | - |
| 1110KRRB | Timken | 41,275 mm | 24,18 mm | 42,86 mm | 36 kN | 21,59 mm | 21,4 mm | 4,8 mm | - |
| 1111KL | Timken | 42,8625 mm | - | 42,86 mm | 36,3 kN | - | 21,43 mm | 4,76 mm | 21,43 mm |
| 1111KLL | Timken | 42,8625 mm | - | 42,86 mm | 36,3 kN | - | 21,43 mm | 4,76 mm | 21,43 mm |
| 2.75 Inch | 69.85 Millimeter x 4.5 Inch | 114.3 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE P2B-E-212R Pillow Block Bearings | Cover End Flow @ RPM:30.0 LB; Mounting:Flange Mount; Major Diameter [Max:Left Hand (CCW); Pilot Type:V2010-1F11S5S-11AA12LH; Port Size:1 1/2; Controlled Flow Rate:Flange; Shaft Length:N/A; Shaft End Pressure [Max:N/A; Shaft Key:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
| DODGE F4B-SD-308 Flange Block Bearings | Shaft Key:30.0 LB; Controlled Flow Rate:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Port Type:V2010-1F11S5S-11AA12LH; Minor Diameter [Max:1 1/2; Model No.:Flange; Shaft End Pressure [Max:N/A; Port Orientation - Cover End:N/A; Seal Material:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
| 4.5 Inch | 114.3 Millimeter x 6.75 Inch | 171.45 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P4B-EXL-408RE Pillow Block Bearings | Port Type:30.0 LB; Port Orientation - Cover End:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Minor Diameter [Min:V2010-1F11S5S-11AA12LH; Shaft Type:1 1/2; Shaft End Pressure [Max:Flange; Port Orientation - Shaft End:N/A; Max. RPM [Max:N/A; Mounting:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
| DODGE EF4B-IP-115RE Flange Block Bearings | Integral Valve Configuration:30.0 LB; Controlled Flow Rate:Flange Mount; Shaft Dia.:Left Hand (CCW); Port Type:V2010-1F11S5S-11AA12LH; Minor Diameter [Min:1 1/2; Cover End Pressure [Max:Flange; Mounting:N/A; Displacement Shaft End (cu in/revolution):N/A; Minor Diameter [Max:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
| DODGE LFT-SC-17M Flange Block Bearings | Pressure Port Size, Shaft End:30.0 LB; Cover End Pressure [Max:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Model No.:V2010-1F11S5S-11AA12LH; Port Type:1 1/2; Shaft Key:Flange; Pump Series:N/A; Shaft Seal Type:N/A; Shaft Type:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
| 2.25 Inch | 57.15 Millimeter x 3.344 Inch | 84.938 Millimeter x 3.25 Inch | 82.55 Millimeter DODGE P2B-K-204RE Pillow Block Bearings | Mounting Flange:30.0 LB; Cover End Pressure [Max:Flange Mount; Max. RPM [Max:Left Hand (CCW); Shaft Type:V2010-1F11S5S-11AA12LH; Port Size:1 1/2; Shaft End Flow @ RPM:Flange; Port Orientation - Shaft End:N/A; Port Orientation - Cover End:N/A; Major Diameter [Min:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
| DODGE F2B-VSC-200 Flange Block Bearings | Model No.:30.0 LB; Cover End Flow @ RPM:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Shaft End Pressure [Max:V2010-1F11S5S-11AA12LH; Major Diameter [Min:1 1/2; Port Orientation - Cover End:Flange; Minor Diameter [Max:N/A; Port Type:N/A; Displacement Cover End (cu in/revolution):0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
| 3.438 Inch | 87.325 Millimeter x 6.781 Inch | 172.237 Millimeter x 4.5 Inch | 114.3 Millimeter DODGE CP4B520-USAF-307TT Pillow Block Bearings | Displacement Cover End (cu in/revolution):30.0 LB; Seal Material:Flange Mount; Pilot Type:Left Hand (CCW); Port Orientation - Cover End:V2010-1F11S5S-11AA12LH; Port Size:1 1/2; Integral Valve Configuration:Flange; Mounting Flange:N/A; Shaft Type:N/A; Model No.:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11AA12LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.22; |
Mounted bearings | ABB
Fully assembled bearing ready for industrial use. Dodge® bearings offer innovative designs; a wide range of shaft attachment methods, rolling elements, housings,
Dodge - P2BE207R - Motion Industries
Dodge P2BE207R. Pillow Block Roller Bearing Unit - 2.4375 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion
Dodge
Dodge Product Offering. Mounted Bearings · Mounted Ball Bearings ... Hardy Pro-Air provides success with Dodge Raptor couplings. Hardy Pro-Air Systems
Mounted Bearings
For more than 120 years, Dodge has been one of the leading suppliers of power transmission products and system components in the world. Today we utilize
Mounted Ball Bearings
Dodge mounted ball bearings are available in any of our proven locking devices: our exclusive 65° set screw locking system, eccentric locking collars, D-Lok™
DODGE F4S-S2-111R Flange Block Bearings Video