Sponsored products related to FAG B7205-C-T-P4S-UL Precision Ball Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | R | a | r | D | C | e | B |
| 07087X/07205 | Timken | 22,225 mm | 1,5 mm | - | 2 mm | 52 mm | 12,7 mm | - | 14,26 mm |
| 07093/07205 | KOYO | 23,812 mm | - | 12,3 mm | - | - | 26,7 kN | - | 14,26 mm |
| 07097/07205 | Timken | 25 mm | 1,5 mm | - | 2 mm | 52 mm | 12,7 mm | - | 14,26 mm |
| 07098/07205 | NSK | 24,981 mm | - | 12,1 mm | - | 52,001 mm | 26 kN | 0.4 | 14,26 mm |
| 07100-S/07205 | Timken | 25,4 mm | 1,5 mm | - | 2 mm | 52 mm | 12,7 mm | - | 14,26 mm |
| 07100-SA/07205 | Timken | 25,4 mm | 3,3 mm | - | 2 mm | 52 mm | 12,7 mm | - | 14,26 mm |
| SS7205 ACD/HCP4A | SKF | 25 mm | - | 17 mm | - | 52 mm | 13 kN | - | 15 mm |
| SS7205 ACD/P4A | SKF | 25 mm | - | 17 mm | - | 52 mm | 13 kN | - | 15 mm |
| SS7205 CD/HCP4A | SKF | 25 mm | - | 13 mm | - | 52 mm | 13,5 kN | - | 15 mm |
| SS7205 CD/P4A | SKF | 25 mm | - | 13 mm | - | 52 mm | 13,5 kN | - | 15 mm |
| S7205 ACD/HCP4A | SKF | 25 mm | - | 16.7 mm | - | 52 mm | - | - | 15 mm |
| FAG 51236-MP Thrust Ball Bearing | Port Orientation - Cover End:75.0 LB; Mounting:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Controlled Flow Rate:3520VQ30E11-11DD20; Spline Description:3; GPM @ 1,800 rpm, Shaft End:Flange; Displacement Cover End (cu in/revolution):N/A; Pressure Port Size, Cover End:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Port Orientation - Shaft End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6; |
| FAG 22332-E1A-MA1-T41A Roller Bearings | GPM @ 1,800 rpm, Cover End:75.0 LB; Spline Description:Flange Mount; Shaft Dia.:Right Hand (CW); Max. RPM [Max:3520VQ30E11-11DD20; Manufacturer Part No.:3; Pressure Port Size, Cover End:Flange; Minor Diameter [Max:N/A; Relief Valve Setting:Standard Pilot; Shaft End Pressure [Max:1.25 in; Pump Series:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6; |
| 4 mm x 13 mm x 5 mm FAG 624 Single Row Ball Bearings | Pressure Port Size, Shaft End:75.0 LB; Cover End RPM [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Shaft End Pressure [Max:3520VQ30E11-11DD20; Pilot Type:3; Shaft End RPM [Max:Flange; Rotation:N/A; Shaft Seal Type:Standard Pilot; Major Diameter [Min:1.25 in; Port Type:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6; |
| FAG 6214-Z Single Row Ball Bearings | Minor Diameter [Min:75.0 LB; Major Diameter [Min:Flange Mount; Shaft Key:Right Hand (CW); Pump Series:3520VQ30E11-11DD20; Cover End Pressure [Max:3; Major Diameter [Max:Flange; Pressure Port Size, Shaft End:N/A; Shaft Type:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Port Orientation - Cover End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6; |
| FAG 61905 2Z Single Row Ball Bearings | Spline Description:75.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft Seal Type:Right Hand (CW); Displacement Cover End (cu in/revolution):3520VQ30E11-11DD20; Mounting:3; GPM @ 1,800 rpm, Shaft End:Flange; GPM @ 1,800 rpm, Cover End:N/A; Weight:Standard Pilot; Max. RPM [Max:1.25 in; Shaft Length:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6; |
| 80 mm x 170 mm x 58 mm FAG NU2316-E-TVP2 Cylindrical Roller Bearings | Major Diameter [Max:75.0 LB; Pilot Type:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Pump Series:3520VQ30E11-11DD20; Pressure Port Size, Cover End:3; Shaft Type:Flange; Mounting Flange:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Port Size:1.25 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6; |
| FAG HS71922-C-T-P4S-UL Precision Ball Bearings | Major Diameter [Min:75.0 LB; Minor Diameter [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Mounting Flange:3520VQ30E11-11DD20; Shaft Dia.:3; Pressure Port Size, Cover End:Flange; Shaft Type:N/A; Minor Diameter [Min:Standard Pilot; Shaft End Pressure [Max:1.25 in; Manufacturer Part No.:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6; |
| 300 mm x 540 mm x 140 mm FAG 22260-MB Spherical Roller Bearings | Pressure Port Size, Shaft End:75.0 LB; Port Size:Flange Mount; Spline Description:Right Hand (CW); Seal Material:3520VQ30E11-11DD20; Controlled Flow Rate:3; Displacement Cover End (cu in/revolution):Flange; Port Type:N/A; Shaft Seal Type:Standard Pilot; Shaft End Pressure [Max:1.25 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6; |
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
FAG B7205-C-T-P4S-UL Precision Ball Bearings Video