Sponsored products related to 1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter SKF NUP 207 ECP/C3 Cylindrical Roller Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | D | A | H | J | L | N | S |
| ALF207 | KOYO | 35 mm | - | 24 mm | 122 mm | 100 mm | 89 mm | 12 mm | 8,5 mm |
| ALF207-20 | KOYO | 31.75 mm | - | 24 mm | 122 mm | 100 mm | 89 mm | 12 mm | 8,5 mm |
| ALF207-21 | KOYO | 33,3375 mm | - | 24 mm | 122 mm | 100 mm | 89 mm | 12 mm | 8,5 mm |
| ALF207-22 | KOYO | 34,925 mm | - | 24 mm | 122 mm | 100 mm | 89 mm | 12 mm | 8,5 mm |
| ALF207-23 | KOYO | 36,5125 mm | - | 24 mm | 122 mm | 100 mm | 89 mm | 12 mm | 8,5 mm |
| 10N.6207.F074.D | SNR | 35 mm | 72 mm | - | - | - | - | - | - |
| 10N.6207.F075.E | SNR | 35 mm | 72 mm | - | - | - | - | - | - |
| YSP 212-207 SB-2F | SKF | 61.912 mm | 110 mm | - | - | - | - | - | - |
| YSPAG 207 | SKF | 35 mm | 72 mm | - | - | - | - | - | - |
| YSPAG 207-104 | SKF | 31.75 mm | 72 mm | - | - | - | - | - | - |
| YSPAG 207-106 | SKF | 34.925 mm | 72 mm | - | - | - | - | - | - |
| 1.969 Inch | 50 Millimeter x 2.835 Inch | 72 Millimeter x 2.362 Inch | 60 Millimeter SKF 71910 ACD/P4APBCB Precision Ball Bearings | Cover End Pressure [Max:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Seal Material:Right Hand (CW); Pressure Port Size, Cover End:2520VQ21E11-11DD20; Manufacturer Part No.:2 1/2; Cover End Flow @ RPM:Flange; Mounting:N/A; Major Diameter [Min:Standard Pilot; Port Type:0.875 in; Pump Series:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| SKF 61900-2RS1/W64 Single Row Ball Bearings | Controlled Flow Rate:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Cover End Flow @ RPM:2520VQ21E11-11DD20; Seal Material:2 1/2; Displacement Shaft End (cu in/revolution):Flange; Shaft End Pressure [Max:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Minor Diameter [Min:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| 2.75 Inch | 69.85 Millimeter x 3.625 Inch | 92.075 Millimeter x 3.25 Inch | 82.55 Millimeter SKF SYR 2.3/4 H Pillow Block Bearings | Minor Diameter [Min:45.0 LB; Cover End Pressure [Max:Flange Mount; Shaft Length:Right Hand (CW); Minor Diameter [Max:2520VQ21E11-11DD20; Shaft End RPM [Max:2 1/2; Shaft Dia.:Flange; Pressure Port Size, Cover End:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Seal Material:0.875 in; Weight:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| 2 Inch | 50.8 Millimeter x 2.344 Inch | 59.538 Millimeter x 59.531 mm SKF SYR 2 N-118 Pillow Block Bearings | Port Type:45.0 LB; Spline Description:Flange Mount; Minor Diameter:Right Hand (CW); Cover End Pressure [Max:2520VQ21E11-11DD20; Port Orientation - Cover End:2 1/2; Pump Series:Flange; Shaft Key:N/A; Pressure Port Size, Shaft End:Standard Pilot; Cover End RPM [Max:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| SKF 608-2Z/LHT23VQ5243 Single Row Ball Bearings | Major Diameter [Min:45.0 LB; Shaft End Pressure [Max:Flange Mount; Minor Diameter [Min:Right Hand (CW); Minor Diameter [Max:2520VQ21E11-11DD20; Pressure Port Size, Shaft End:2 1/2; Pump Series:Flange; Pressure Port Size, Cover End:N/A; Shaft Type:Standard Pilot; Max. RPM [Max:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| SKF 6203-2Z/C2LHT23 Single Row Ball Bearings | Shaft End Pressure [Max:45.0 LB; Port Orientation - Cover End:Flange Mount; Spline Description:Right Hand (CW); Major Diameter [Max:2520VQ21E11-11DD20; Cover End RPM [Max:2 1/2; Mounting:Flange; Weight:N/A; Major Diameter [Min:Standard Pilot; Pressure Port Size, Shaft End:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| 0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 0.811 Inch | 20.6 Millimeter SKF 5204CF Angular Contact Ball Bearings | Manufacturer Part No.:45.0 LB; Shaft End Pressure [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Mounting:2520VQ21E11-11DD20; Shaft Dia.:2 1/2; Integral Valve Configuration:Flange; Minor Diameter:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Major Diameter [Min:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| 3.346 Inch | 85 Millimeter x 7.087 Inch | 180 Millimeter x 1.614 Inch | 41 Millimeter SKF 21317 E/C3 Spherical Roller Bearings | Shaft Dia.:45.0 LB; Mounting Flange:Flange Mount; Major Diameter [Min:Right Hand (CW); Port Orientation - Shaft End:2520VQ21E11-11DD20; Port Type:2 1/2; Cover End Pressure [Max:Flange; Rotation:N/A; Mounting:Standard Pilot; Controlled Flow Rate:0.875 in; Seal Material:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
SKF Bearing Select - New
Please, use our new online bearing selection tool, SKF Bearing Select*. SKF Bearing Select will replace the SKF Bearing Calculator as well as the current
Bearings, Seals, Lubrication, Mechatronics & Services | SKF
SKF is a leading bearing technology provider around rotating equipment since 1907 with experience in over 40 industries. Visit the SKF site to learn more about
Bearings, units and housings
The application demands and operating conditions of rotating machinery are extremely diverse. To achieve the best performance fit for your application, there
Bearings, units and housings
SKF started with a bearing, and to this day is still a world leader in the design and manufacture of rolling and plain bearings. Here you will find our full assortment
SKF Group - Bearings and units Lubrication solutions
NEWS. 2018 January 17, 08:00. Hans Stråberg proposed as new Chairman of the Board of AB SKF. Colleen Repplier proposed as new Board Member
1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter SKF NUP 207 ECP/C3 Cylindrical Roller Bearings Video